Errata - English

In USP Reference Standards 〈11〉: Change
USP Rivastigmine Tartrate R-Isomer RS
to:
USP Rivastigmine Tartrate R-Isomer RS
(R)-3-[1-(Dimethylamino)ethyl]phenyl ethylmethylcarbamate, hydrogen tartrate.
C₁₄H₂₂N₂O₂ · C₄H₆O₆ 400.42

In Dissolution 〈711〉/Standard solution: Change
USP Dapsone RS of a known concentration in Medium
to:
(L/1000) mg/mL of USP Dapsone RS in Medium, where L is the label claim in mg/Tablet. Transfer a portion of this solution containing 0.2 mg of dapsone to a 25-mL volumetric flask, add 5 mL of 1 N sodium hydroxide, and dilute with water to volume.

In Organic Impurities/Standard solution: Change
isosorbide related compound A
to:
isosorbide mononitrate related compound A
AND
In System suitability/Suitability requirements/Relative standard deviation: Change
isosorbide related compound A,
to:
isosorbide mononitrate related compound A,
AND
In four instances in Analysis: Change
isosorbide related compound A,
to:
isosorbide mononitrate related compound A,
AND
In Table 1: Change
Isosorbide related compound A
to:
Isosorbide mononitrate related compound A

In Organic Impurities/Standard solution: Change
isosorbide related compound A
to:
isosorbide mononitrate related compound A
AND
In System suitability/Suitability requirements/Relative standard deviation: Change
isosorbide related compound A,
to:
isosorbide mononitrate related compound A,
AND
In four instances in Analysis: Change
isosorbide related compound A,
to:
isosorbide mononitrate related compound A,
AND
In Table 1: Change
Isosorbide related compound A
to:
Isosorbide mononitrate related compound A

In B.: Change
The retention time of the major peak of the Sample solution exhibits maxima and minima at the same wavelengths as those of the Standard solution, as obtained in the Assay.
to:
The retention time of the major peak of the Sample solution corresponds to that of the Standard solution, as obtained in the Assay.

In Sulfite/Analysis/footnote 1: Change
Test kit for sulfite determination may be ordered from the following suppliers: Megazyme Ltd. (Product code: K-ETSULPH); R-Biopharm (Enzytec) (Article No.: E6275); BioSenTec/Nzytech (Catalogue No.: AK00071).
to:
Test kit for sulfite determination may be ordered from the following suppliers: Megazyme Ltd. (Product code K-ETSULPH); R-Biopharm (Enzytec) (Article No. E6275); Nzytech (Catalogue No. AK00071) and BioSenTec (Product reference 040-E).

Change
Prepare Lidocaine, Racepinephrine, and Tetracaine Hydrochlorides Compounded Topical Gel containing 40 mg/mL of lidocaine hydrochloride, 1 mg/mL of racepinephrine hydrochloride, and 10 mg/mL of tetracaine hydrochloride as follows (see Pharmaceutical Compounding—Sterile Preparations <797>).
to:
Prepare Lidocaine, Racepinephrine, and Tetracaine Hydrochlorides Compounded Topical Gel containing 40 mg/mL of lidocaine hydrochloride, 1 mg/mL of racepinephrine hydrochloride, and 10 mg/mL of tetracaine hydrochloride as follows (see Pharmaceutical Compounding—Nonsterile Preparations <795>).

In USP Reference Standards 〈11〉/USP Iodixanol Related Compound E RS: Change
5-[[3-[[3-[[(2,3-Dihydroxypropyl)amino]carbonyl]-5- [[amino]carbonyl]-2,4,6-triiodophenyl](acetylimino)]-2-hydroxypropyl]-(acetylimino)]-N,N′-bis(2,3-dihydroxypropyl)-2,4,6-triiodo-1,3-benzenedicarboxamide.
to:
5-{N-[3-(N-{3-Carbamoyl-5-[(2,3-dihydroxypropyl)carbamoyl]-2,4,6-triiodophenyl}acetamido)-2-hydroxypropyl]acetamido}-N¹,N³-bis(2,3-dihydroxypropyl)-2,4,6-triiodoisophthalamide.

In Organic Impurities, Procedure 2/footnote 4: Change
5-[[3-[[3-[[[3-[[3-[[3,5-Bis-[[[2,3-dihydroxypropyl]amino]carbonyl]-2,4,6-triiodophenyl](acetylimino)]-2-hydroxypropyl](acetylimino)]-5-[[[2,3-dihydroxypropyl]amino]carbonyl]-2,4,6-triiodophenyl]carbonyl]amino]-2-hy droxypropyl]oxy]-2-hydroxypropyl](acetylimino)]-N,N'-bis(2,3-dihy droxypropyl)-2,4,6-triiodo-1,3-benzendicarboxamide.
to:
5-[[3-[[3-[[[3-[[3-[[3,5-Bis-[[[2,3-dihydroxypropyl]amino]carbonyl]-2,4,6-triiodophenyl](acetylamino)]-2-hydroxypropyl](acetylamino)]-5-[[[2,3-dihydroxypropyl]amino]carbonyl]-2,4,6-triiodophenyl]carbonyl]amino]-2-hydroxypropyl]oxy]-2-hydroxypropyl](acetylamino)]-N,N'-bis(2,3-dihydroxypropyl)-2,4,6-triiodo-1,3-benzendicarboxamide.

In Dissolution 〈711〉/Test 1/Analysis: Change
Result = (r_U/r_S) × C_S × V × (1/L) × 100
r_U = peak response of linezolid from the Sample solution
r_S = peak response of linezolid from the Standard solution
C_S = concentration of USP Linezolid RS in the Standard solution (mg/mL)
V = volume of Medium, 900 mL
L = label claim (mg/Tablet)
to:
Result = (r_U/r_S) × C_S × V × (1/L) × D × 100
r_U = peak response of linezolid from the Sample solution
r_S = peak response of linezolid from the Standard solution
C_S = concentration of USP Linezolid RS in the Standard solution (mg/mL)
V = volume of Medium, 900 mL
L = label claim (mg/Tablet)
D = dilution factor of the Sample solution, as needed

Change
A: The contents of the Capsules respond to Identification tests A and B under Theophylline Tablets.
B: The retention time of the major peak in the chromatogram of the Assay preparation corresponds to that in the chromatogram of the Standard preparation, as obtained in the Assay.
to:
A: Triturate a quantity of the contents of Capsules, equivalent to about 500 mg of theophylline, with 10-mL and 5-mL portions of solvent hexane, and discard the solvent hexane. Triturate the residue with two 10-mL portions of a mixture of equal volumes of 6 N ammonium hydroxide and water, and filter each time. Evaporate the combined filtrates to about 5 mL, neutralize, if necessary, with 6 N acetic acid, using litmus, and then cool to about 15°, with stirring. Collect the precipitate on a filter, wash it with cold water, and dry at 105° for 2 hours: the theophylline so obtained melts between 270° and 274° (see Melting Range or Temperature 〈741〉, Procedures, Procedure for Class I). Retain the remaining portion of the theophylline for use in Identification test B.
B: The IR absorption spectrum of a potassium bromide dispersion of the residue obtained in Identification test A exhibits maxima only at the same wavenumbers as that of a potassium bromide dispersion of USP Theophylline RS.
C: The retention time of the major peak in the chromatogram of the Assay preparation corresponds to that in the chromatogram of the Standard preparation, as obtained in the Assay.

In B. Identification Tests—General 〈191〉, Chemical Identification Tests, Chloride: Change
Meets the requirements when tested as specified in test B.
to:
Meets the requirements of the test for amine hydrochlorides

Change
Shake a portion of Oral Suspension with a mixture of acetone and 0.1 N hydrochloric acid (4:1) to obtain a solution containing about 1 mg of amoxicillin per mL. The solution responds to the Identification test under Amoxicillin Capsules.
to:
Prepare a test solution by shaking a portion of Oral Suspension with a mixture of acetone and 0.1 N hydrochloric acid (4:1) to obtain a solution containing about 1 mg of amoxicillin per mL. Prepare a Standard solution of USP Amoxicillin RS in 0.1 N hydrochloric acid containing 1 mg per mL. Use within 10 minutes after preparation. Apply separately 5 µL of each solution on a thin-layer chromatographic plate coated with a 0.25-mm layer of chromatographic silica gel mixture (see Chromatography 〈621〉). Place the plate in a suitable chromatographic chamber, and develop the chromatogram in a solvent system consisting of a mixture of methanol, chloroform, water, and pyridine (90:80:30:10). When the solvent front has moved about three-fourths of the length of the plate, remove the plate from the chamber, and dry with warm air for 10 minutes. Locate the spots on the plate by spraying lightly with a solution of ninhydrin in alcohol containing 3 mg per mL, and dry at 110° for 15 minutes: the R_F value of the principal spot obtained from the test solution corresponds to that obtained from the Standard solution.

Change
Where the label states that Seco barbital Sodium is sterile, it meets the requirements for Sterility Tests 〈71〉 and for Bacterial endotoxins under Secobarbital Sodium for Injection. Where the label states that Secobarbital Sodium must be subjected to further processing during the preparation of injectable dosage forms, it meets the requirements for Bacterial endotoxins under Secobarbital Sodium for Injection.
to:
Where the label states that Secobarbital Sodium is sterile, it meets the requirements for Sterility Tests 〈71〉 and the level of bacterial endotoxins is not more than 0.9 USP Endotoxin Units per mg of secobarbital sodium tested per Bacterial Endotoxins Test <85>. Where the label states that Secobarbital Sodium must be subjected to further processing during the preparation of injectable dosage forms, the level of bacterial endotoxins is not more than 0.9 USP Endotoxin Units per mg of secobarbital sodium tested per Bacterial Endotoxins Test <85>.

In Acetic Acid in Peptides/Analysis: Change
C_SPA = concentration of potassium acetate in each of the Standard solutions (mg/mL)
to:
C_SPA = concentration of potassium acetate in each of the Standard solutions (µg/mL)
AND
In Ammonium/Analysis: Change
C_SAC = concentration of ammonium chloride in each of the Standard solutions (mg/mL)
to:
C_SAC = concentration of ammonium chloride in each of the Standard solutions (µg/mL)

Change
Application volume, Developing solvent system, Procedure—Proceed as directed for the Identification test under Amoxicillin Tablets.
to:
Application volume—5 µL.
Developing solvent system—a mixture of methanol, chloroform, water, and pyridine (90:80:30:10).
Procedure—Proceed as directed in Thin-Layer Chromatographic Identification Test <201>. Dry the plate with the aid of a current of warm air for 10 minutes. Locate the spots on the plate by spraying lightly with a solution of ninhydrin in alcohol containing 3 mg per mL, and dry at 110° for 15 minutes.

Change
The solution obtained responds to the Identification test under Amoxicillin Capsules.
to:
Prepare a Standard solution of USP Amoxicillin RS in 0.1 N hydrochloric acid containing 4 mg per mL. Use within 10 minutes after preparation. Apply separately 5 µL of each solution on a thin-layer chromatographic plate coated with a 0.25-mm layer of chromatographic silica gel mixture (see Chromatography <621>). Place the plate in a suitable chromatographic chamber, and develop the chromatogram in a solvent system consisting of a mixture of methanol, chloroform, water, and pyridine (90:80:30:10). When the solvent front has moved about three-fourths of the length of the plate, remove the plate from the chamber, and dry with warm air for 10 minutes. Locate the spots on the plate by spraying lightly with a solution of ninhydrin in alcohol containing 3 mg per mL, and dry at 110° for 15 minutes: the R_F value of the principal spot obtained from the test solution corresponds to that obtained from the Standard solution.

In Organic Impurities/Table 2: Change
3'-N-Demethyl-3'-N-[(4-methylphenyl)sulfonyl]azithromycin^m
to:
3′-N-{[4-(Acetylamino)phenyl]sulfonyl}-3′-demethylazithromycin^m
AND
In Table 2/footnote m: Change
(2R,3S,4R,5R,8R,10R,11R,12S,13S,14R)-13-[(2,6-Dideoxy-3-C-methyl-3-O-methyl-α-L-ribo-hexopyranosyl)oxy]-2-ethyl-3,4,10-trihydroxy-3,5,6,8,10,12,14-heptamethyl-11-[[3-[N-(4-methylphenylsulfonyl)-N-methylamino]-3,4,6-trideoxy-ß-D-xylo-hexopyranosyl]oxy]-1-oxa-6-azacyclopentadecan-15-one.
to:
(2R,3S,4R,5R,8R,10R,11R,12S,13S,14R)-13-[(2,6-Dideoxy-3-C-methyl-3-O-methyl-α-L-ribo-hexopyranosyl)oxy]-2-ethyl-3,4,10-trihydroxy-3,5,6,8,10,12,14-heptamethyl-11-[[3-[N-(4-acetamidophenylsulfonyl)-N-methylamino]-3,4,6-trideoxy-β-D-xylo-hexopyranosyl]oxy]-1-oxa-6-azacyclopentadecan-15-one.

In Dissolution 〈711〉/Test for dutasteride/Tier 2/Medium: Change
10 g/L of cetyltrimethylammonium bromide and 750,000 USP units of activity/mg of pepsin, purified in 0.1 N hydrochloric acid; 900 mL
to:
Dissolve 10 g of cetyltrimethylammonium bromide and 1.6 g of pepsin, purified in 1000 mL of 0.1 N hydrochloric acid; 900 mL

In USP Reference Standards 〈11〉/USP Cefdinir Related Compound A RS: Change
413.43
to:
413.42
AND
In USP Reference Standards 〈11〉/USP Cefdinir Related Compound B RS: Change
C₁₄H₁₃N₄O₄S₂ 365.41
to:
C₁₄H₁₄N₄O₄S₂ 366.41

In USP Reference Standards 〈11〉/USP Cefdinir Related Compound A RS: Change
413.43
to:
413.42
AND
In USP Reference Standards 〈11〉/USP Cefdinir Related Compound B RS: Change
C₁₄H₁₃N₄O₄S₂ 365.41
to:
C₁₄H₁₄N₄O₄S₂ 366.41

In Dissolution 〈711〉/Test 2/Acid stage: Change
Acid stage standard solution: (L/10) mg/mL of USP Pantoprazole Sodium RS from the Standard stock solution in Acid stage medium, where L is the label claim in mg/Tablet
to:
Acid stage standard solution: (L/10000) mg/mL of USP Pantoprazole Sodium RS from the Standard stock solution in Acid stage medium, where L is the label claim in mg/Tablet
AND
In Dissolution <711>/Test 2/Buffer stage: Change
Buffer stage standard solution: (L/1000) of USP Pantoprazole Sodium RS where L is the label claim in mg/Tablet
to:
Buffer stage standard solution: (L/1000) mg/mL of USP Pantoprazole Sodium RS from the Standard stock solution in Buffer stage medium, where L is the label claim in mg/Tablet

In Vitamin A, Method 3/Analysis: Change
C_S = concentration of retinyl acetate (C₂₃H₃₂O₂) from USP Vitamin A RS in the Standard solution (μg/mL)
to:
C_S = concentration of retinyl acetate (C₂₂H₃₂O₂) from USP Vitamin A RS in the Standard solution (μg/mL)

In Alcohol-Insoluble Matter/Sample solution: Change
100 mg/mL of Urea dissolved in warm alcohol
to:
Dissolve 5.0 g of Urea in 50 mL of warm alcohol.
AND
In Alcohol-Insoluble Matter/Analysis: Change
If any insoluble residue remains, pass the Sample solution through a tared filter, wash the residue and the filter with 20 mL of warm alcohol per 50 mL of Sample solution, and dry at 105° for 1 h.
to:
If any insoluble residue remains, pass the Sample solution through a tared filter, wash the residue and the filter with 20 mL of warm alcohol, and dry at 105° for 1 h.