Errata - English

Line 5: Change
(9RS)-3-[2-[4-(6-Fluoro-1,2-benzisoxazol-3-yl)piperidin-1-yl]]ethyl]-9-hydroxy-2-methyl-6,7,8,9-tetrahydro-4H-pyrido [1,2-a]pyrimidin-4-one
to:
(9RS)-3-[2-[4-(6-Fluoro-1,2-benzisoxazol-3-yl)piperidin-1-yl]]ethyl]-9-hydroxy-2-methyl-6,7,8,9-tetrahydro-4H-pyrido[1,2-a]pyrimidin-4-one

Line 2 of USP Ranitidine Related Compound C RS: Change
N-[2-[[[5-[(Dimethylamino)methyl]-2-furanyl]methyl]sulfinyl]ethyl]-N-methyl-2-nitro-1,1-ethenediamine.
to:
N-{2-[({5-[(Dimethylamino)methyl]-2-furanyl}methyl)sulfinyl]ethyl}-N′-methyl-2-nitro-1,1-ethenediamine.

Line 1 of Standard solution: Change
Prepare 1.0 mg/mL of USP Oleyl Alcohol RS in Internal standard solution, and heat the solution in a sealed container in a 50° water bath until oleyl alcohol is dissolved. Allow the solution to cool to room temperature, and mix well.
to:
1.0 mg/mL of USP Oleyl Alcohol RS in Internal standard solution
AND
Line 1 of Sample solution: Change
Prepare 1.0 mg/mL of Oleyl Alcohol in Internal standard solution, and heat the solution in a sealed container in a 50° water bath until oleyl alcohol is dissolved. Allow the solution to cool to room temperature, and mix well.
to:
1.0 mg/mL of Oleyl Alcohol in Internal standard solution

Line 2 of USP Ranitidine Related Compound C RS: Change
N-[2-[[[5-[(Dimethylamino)methyl]-2-furanyl]methyl]sulfinyl]ethyl]-N-methyl-2-nitro-1,1-ethenediamine.
to:
N-{2-[({5-[(Dimethylamino)methyl]-2-furanyl}methyl)sulfinyl]ethyl}-N′-methyl-2-nitro-1,1-ethenediamine.

Line 3 of USP Trospium Chloride Related Compound C RS:Change
(1R,3r,5S)-3-Hydroxyspiro[8-azoniabicyclo[3.2.1]octane-8,1′-pyrrolidinium] chloride.
to:
(1R,3r,5S)-3-Hydroxyspiro[8-azoniabicyclo[3.2.1]octane-8,1′-pyrrolidinium] chloride, or (1R,3r,5S)-3-Hydroxyspiro[bicyclo[3.2.1]octane-8,1′-pyrrolidin]-1′-ium chloride.

Variable definition list of second equation in Test 2/Analysis: Change
V_S = volume of the Sample solution withdrawn at each time point and replaced with Medium (mL)
to:
V_S = volume of the Sample solution withdrawn at each time point (mL)
AND
Variable definition list of second equation in Test 3/Analysis: Change
V_S = volume of the Sample solution withdrawn at each time point and replaced with Medium (mL)
to:
V_S = volume of the Sample solution withdrawn at each time point (mL)

Line 1 of System suitability solution:Change
USP Diphenhydramine Hydrochloride Related Compound A RS
to:
USP Diphenhydramine Related Compound A RS
AND
Line 4 of System suitability: Change
for diphenhydramine hydrochloride related compound A and diphenhydramine hydrochloride are
to:
for diphenhydramine related compound A and diphenhydramine are

Line 2: Change
Sample: System suitability solution
to:
Samples: System suitability solution and Standard solution
AND
Line 2 of Suitability requirements: Change
Resolution: NLT 1.5 between the digoxin and lanatoside C peaks
Relative standard deviation: NMT 2.0%, determined from the digoxin peak in replicated injections
to:
Resolution: NLT 1.5 between the digoxin and lanatoside C peaks, System suitability solution
Relative standard deviation: NMT 2.0%, determined from the digoxin peak in replicated injections, Standard solution

Line 1 of the Equation: Change
[(W_1i − W_T) − (W_14i − W_T) − (W_C1 − W_C14)] × 365 × {[100/(W_1i − W_T)] × 14}
to:
[(W_1i − W_T) − (W_14i − W_T) − (W_C1 − W_C14)] × 365 × 100/(W_1i − W_T) × 14

Line 3 of Analysis: Change
of USP Memantine Related Compound E RS or
to:
of memantine related compound E or
AND
In the variable definition list: Change
r_U = peak response of USP Memantine Related Compound E RS or any individual degradation product from the Sample solution
to:
r_U = peak response of memantine related compound E or any individual degradation product from the Sample solution

Product column: Change
10.00 (neat), 5.00, 2.50, 1.25, 0.63, 0.31, 0.16
to:
10.00 (neat), 5.00, 2.50, 1.25, 0.625, 0.3125, 0.15625
AND
Sample 1/HCP ratio column: Change
4.9, 5.7, 4.8, 5.9, 5.0, 5.1, <6
to:
4.90, 5.70, 4.80, 5.92, 4.96, 5.12, <6
AND
Sample 2/HCP ratio column: Change
2.0, 3.3, 4.0, 5.9, 5.3, 6.1, <6
to:
2.00, 3.30, 4.00, 5.92, 5.28, 6.08, <6
AND
Sample 3/HCP ratio column: Change
0.3, 0.5, 0.6, 0.9, 1.4, <6, <6
to:
0.32, 0.50, 0.60, 0.88, 1.44, <6, <6
AND
Sample 3/% max ratio value column: Change
83%
to:
61%

Line 5 of Standard solution: Change
Mix 10.0 mL of this solution
to:
Mix 5.0 mL of this solution
AND
Line 7 of Standard solution: Change
about 0.67 µg/mL
to:
about 0.5 µg/mL
Line 4 of Sample solution: Change
10.0 mL of this solution
to:
5.0 mL of this solution
AND
In the variable definition list in Analysis: Change
V_F = final volume of the Sample solution, 15 mL
D = dilution factor for preparation of the Sample solution, 5
to:
V_F = final volume of the Sample solution, 10 mL
D = dilution factor for preparation of the Sample solution, 10

Delete the subsection
Blank: 140 mL of water and 1 mL of dichlorofluorescein TS
AND
The equation in the Analysis: Change
Result = [(V − B) × N × F × 100]/W
to:
Result = (V × N × F × 100)/W
AND
Line 10 of Analysis: Delete
B = Blank titrant volume (mL)

Line 1 of System suitability solution: Change
0.02 µg/mL each of USP Dextroamphetamine Related Compound A RS and USP Dextroamphetamine Related Compound B RS in Standard solution
to:
Transfer about 40 mL of the Standard solution to a 50-mL volumetric flask. Using a microliter syringe, add 1 µL each of USP Dextroamphetamine Related Compound A RS and USP Dextroamphetamine Related Compound B RS. Dilute with Standard solution to volume.

Line 1 of Standard solution: Change
Prepare a solution containing 1.0 mg/mL of USP Tamsulosin Hydrochloride RS in methanol.
to:
Prepare a solution containing 0.1 mg/mL of USP Tamsulosin Hydrochloride RS in methanol.
AND
Line 6 of Sample solution: Change
Add 30 mL of Mobile phase, and shake by mechanical means for 30 min.
to:
Add 30 mL of Mobile phase, shake by mechanical means for 30 min, and dilute with Mobile phase to volume.

Line 1 of Human thrombin solution: Change
33 Units in terms of the U.S. Standard Thrombin/mL in Buffer
to:
33 U.S. Units in terms of the U.S. Standard Thrombin/mL in Buffer
AND
Line 5 of Analysis: Change
Standard solution and Sample solution,
to:
Standard solution or Sample solution,

Line 8 of Analysis: Change
Result = (r_U/r_S) × (C_S/C_U) × (1/F) × (100/100 − L)
to:
Result = (r_U/r_S) × (C_S/C_U) × (1/F) × (100/[100 − L])

Line 1 of Human thrombin solution: Change
33 Units in terms of the U.S. Standard Thrombin/mL in Buffer
to:
33 U.S. Units in terms of the U.S. Standard Thrombin/mL in Buffer
AND
Line 5 of Analysis: Change
Standard solution and Sample solution,
to:
Standard solution or Sample solution,

Line 6 of Analysis in Test 1: Change
Result = (A_U/A_S) × (C_S/L) × (M_r1/M_r2) × 100
to:
Result = (A_U/A_S) × (C_S/L) × (M_r1/M_r2) × V × 100
AND
Add to the variable definition list in Test 1
V = volume of Medium, 500 mL
AND
Equation in Test 3: Change
Result = (r_U/r_S) × (C_S/L) × (M_r1/M_r2) × 100
to:
Result = (r_U/r_S) × (C_S/L) × (M_r1/M_r2) × V × 100
AND
Add to the variable definition list in Test 3
V = volume of Medium, 500 mL